prostep ivip Symposium: Program

09:00

Registration

10:00

Welcome

10:15

Keynote

Enable Digital Transformation

Dr. Martin Hölz, thyssenkrupp AG

Dr. Michael Picard, thyssenkrupp AG

10:55

Keynote

Karl Heinz Zachries, CONTACT Software GmbH

IoT-driven PLM-Solutions

Yin and yang reconciled

11:35

Keynote

Ministerialdirigent Helge Engelhard, Federal Ministry for Economics Affairs and Energy

12:15

Lunch break

Track 1
Digital Twin & Open Standards

Track 2
Digital Transformation

Track 3
Innovative Design

WORKSHOP

13:45

ProSTEP Synced Factory Twin will become reality – initial implementations

Raimund Menges, DELTA Management Beratung GmbH

Eckard Gatzmanga, Airbus Operations GmbH

Agile global change management

Hans-Peter Roitsch, MAHLE Filtersysteme GmbH

SmartSearch bei General Motors - Status und Entwicklung

Sylke Rosenplänter, Adam Opel AG

Dr. Thomas Kamps, CONWEAVER GmbH

Using Cognitive Technologies to Master Automotive Engineering Information

Markus Zoier, VIRTUAL VEHICLE Research Center

Uwe Danneck, IBM Deutschland GmbH

14:25

Industry 4.0 and the importance of norms and standards within collaborative, digitized process networks

Dr. Michael Stephan, DIN e. V.

Disruptive Changes of the Technical IT Infrastructure through Engineering 4.0

Dr. Fabrice Mogo Nem, Schaeffler AG

Prof. Dr. Martin Eigner, Technische Universität Kaiserslautern

OPTIMIZATION-BASED PRODUCT DESIGN: ENABLING TOOLS AND CULTURE SHIFT

Matteo Nicolich, ESTECO SpA

15:05

Digital Twin in the virtual pilot run

Jan-Hendrik Theilen, Volkswagen AG

Axel Stechow, Siemens Industry Software GmbH

Digital Transformation; Journey and Accelerators

Dr. Florian Gerhardt, NTT DATA Deutschland GmbH

Julia Christin Seeßle, Porsche Consulting GmbH

Re-inventing the idea of shaping materialsShape products. Not production.

Ralph Christnacht, Zuse Holding GmbH

Horst Heckhorn, CENIT AG

15:45

Coffee Break

Track 4
Openness

Track 5
Efficiency

Track 6
Virtual Validation

16:15

CPO - On the way from commitment to Certification

Dr. Dietmar Trippner, dreiconsult GbR

Michael Hertwig, Fraunhofer IAO

Efficient safeguarding of elevator functionalities through virtual commissioning

Jörg Arloth, ESI ITI GmbH

Bankolé Adjibadji, Thyssenkrupp Elevator Innovation GmbH

Accelerating validation within the development of mechatronic systems with an integrated platform

Prof. Dr. Rainer Stark, Fraunhofer IPK

Maik Auricht, Dassault Systemes Deutschland GmbH

17:05

20th ProSTEP iViP Symposium Challenges & Achievments

Ulrich Ahle, Armin Hoffacker, Dr. Fabrice Mogo Nem, Prof. Dr. Oliver Riedel, Prof. Dr. Rainer Stark, Dr. Dietmar Trippner

17:45

Keynote

Prof. Dr. Armin Trost, Professor für Human Resource Management der Fakultät Wirtschaft an der Hochschule Furtwangen

18:25

Get together

8:00

Registration

TRACK 7

Systems Engineering

TRACK 8

Scientific Track

TRACK 9

Visualization

WORKSHOP

08:30

MBSE process for the integrated design of cybertronic manufacturing systems supported by PLM

Chantal Sinnwell, Technische Universität Kaiserslautern Armin Haße, Siemens Industry Software GmbH

Winner Scientific

Award

Best Practices for Creating Technical Data Packages (TDP) using 3D PDF and STEP AP242

Phil Spreier, 3D PDF Consortium

Workshop Start 09:10

Digital Model & Digital Twin

Prof. Dr. Martin Eigner, Technische Universität Kaiserslautern

09:10

Smart Systems Engineering

Dr. Stefan Rude, BMW AG

Emre Nalbant, PROSTEP AG

Smart solutions for digital product development and production processes

Prof. Dr. Birgit Awiszus, Technische Universität Chemnitz

Dr. Marcus Krastel, :em engineering methods AG

Visualization as a Service (VaaS) solution to bring adaptive, secure and scalable 3D PLM data visualization to everyoneMatthias Karl, BMW AG Dr. Johannes Behr, Fraunhofer IGD

09:50

Application of SysML enabled, Model based Systems Engineering in Automotive Product

Development

Dr. Bernd Faber, Ford

Digital transformation for requirements-driven reuse in entire product development

Prof. Dr. Rainer Stark, Fraunhofer IPK

Atakan Sünnetcioglu, Fraunhofer IPK

Role of JT in Digital Transformation Strategies

Rudolf Dotzauer, Continental Automotive Group

Dr. Sebastian Handschuh, Daimler AG

10:30

Kaffeepause

TRACK 10

Systems Engineering

TRACK 11

Scientific Track

TRACK 12

Quality & Trust

WORKSHOP

11:00

Implementing Model-Based Systems Engineering – Human Centricity through Agility

Jochen Epple, Daimler AG

Dr.Stephan Blankenburg, TWT GmbH

The IUNO project: Technology-Data-Marketplace as a use case for IT-Security in Industrie 4.0

Yübo Wang, Technische Universität Darmstadt

Digital Quality Management between Engineering and Production

Torsten Schmied, Adient Ltd. & Co. KG

Christian Emmer, PROSTEP AG

Functional modeling of manufacturing systems

Dr. Hendrik Grosser, Fraunhofer IPK

Claas Blume, Fraunhofer IPK

11:40

Pragmatic MBSE Approach for Automotive Powertrain development

Dr. Masaaki Kubo, Nissan Motor Co., Ltd.

Federated and link-based System Lifecycle Management (SysLM) as Backbone of interdisciplinary Engineering Processes

Prof. Dr. Martin Eigner, Technische Universität Kaiserslautern

Thomas Eickhoff, Technische Universität Kaiserslautern

Security, Trust and IP-Protection for additive manufacturing processes realized by blockchain technology

Dr. Martin Holland, PROSTEP AG

Christopher Nigischer, NXP Semiconductors Germany GmbH

12:20

Lunch break

TRACK 13

Systems Engineering

TRACK 14

Requirements Management

TRACK 15

Project Experiences

WORKSHOP

13:50

MBSE in the Automotive Industry - Potentials and Benefits

Jürgen Rambo, Daimler AG

Christian Huwig, Technische Universität Kaiserslautern

Industrialization of the ReqIF standard - The ReqIF Workflow Forum defines Use Cases and pushes their implementation

Stefan Tautz, Continental Automotive GmbH

Dr. Max Ungerer, PROSTEP AG

Real time appearance of Car programs in Digital mockup

Dr. Casper Wickman, Volvo Cars Mathew Jose, HCL Technologies Ltd.

Have fun grappling the interoperability mountain

Jean-Luc Johnson, Airbus Group

Gray Bachelor, IBM

14:30

mecPro² - The Results of three years research on the topic of developing Cybertronic Products and Production Systems

Dr. Walter Koch, Schaeffler AG

Thomas Dickopf, Technische Universität Kaiserslautern

Introducing SE@GKN: Requirements Engineering, System Design, System Integration and Test for Automotive Systems Engineering

Michael Engelmann, GKN Driveline International GmbH

Dr. Sven Kleiner, :em engineering methods AG

CAE Data and Processes – time to bring in the harvest with Simulation Data Management

Roland Zeillinger, PRIME aerostructures GmbH

Stefan Schmid, Dassault Systemes Deutschland GmbH

15:10

Keynote

Ralf Waltram, BMW AG

15:50

Closing of the Event